Windows XP Set-up
Confirmation
| 1. Open the Start menu and select Control Panel |
 |
| 2. Select Network and Internet Connections. |
|
| 3. Select the Security tab. Nothing need to be done here. |
|
| 4. Enter the following: Address: http://www.hpo.net/links.html Click on the Connections tab. |
|
|
| 5. Select the Always
dial my default connection. Click the Settings button. |
|
|
| 6. Enter the following: User name: Login UserID Password: Login Password Click Properties. |
|
| 7. Click on the Configure button. |
|
| 8. Select
the Maximum Speed for your modem. This is usually the closest speed
above the actual speed of your modem. For example, a 56k modem would be
set to 57600 and an ISDN Terminal Adapter would be set to 115200. Select
the check boxes as seen below. Click OK |
|
| 9. DO NOT
SELECT Use
dialing rules check box. Enter the following information: Phone number: 0570-037037 Skip ahead to point 11 if you have a tone phone. |
| If you have a Pulse phone, put a check mark in the Use dialing rules check box then click on the Use Dialing Rules button. Then follow point 10 and 11. |
|
|
| 10. Click on the Edit button. |
|
| 11. Enter the following information
on the General tab. Country/region: Japan Area Code: This is the Area code from your phone number. For example; if you lived in Yokohama this would be 045. Dial using: You may have to check with NTT to find out if your phone line is Tone or Pulse. If all your settings are correct and you are getting a busy signal that is an indication you have the wrong one selected. The rest of the boxes should be clear as seen below, click OK |
|
|
| 12. Set the settings as seen in the screen shot below. |
| Note: If you had put a check mark in the Use Dialing Rules check box on the General tab you must remove it before continuing. |
|
|
| 13. Select the Typical radio button. |
|
| 14. Confirm or select the following: - Internet Protocol (TCP/IP) - QoS Packet Scheduler - Client for Microsoft Networks |
|
| 15. Select the check box as seen below then continue to click OK till all screens are closed. That completes the Set-up confirmation. |
|
Return to Windows XP Configuration page.
